Foam Cannon - Foam lance

Turtle Wax Foam Lance is used with a pressure washer and Turtle Wax Snow Foam shampoo . The nozzle creates a very thick and rich foam that stays on the surface and dissolves dirt very effectively.

Find Adapters for Kärcher, Nilfisk, KEW, Alto, Black & Decker and Bosch high pressure cleaners here

Turtle Wax Foam Lance - The Ultimate Foam Wash

Instructions for use for Turtle Wax Foam Cannon

1. Assemble the foam lance: Push the thin transparent tube into place and screw the plastic bottle upside down.
2. Screw the appropriate adapter onto the inlet side of the foam lance, making sure to use thread tape to ensure a tight fit. Find the adapters here
3. Fill the bottle with Snow Foam Shampoo according to the recommended mixing ratio, screw the bottle onto the foam lance and shake if necessary to mix the water and soap well.
4. Adjust the air supply at the top of the foam lance to the desired thickness of the foam.
5. Turn the long green nozzle to adjust the width of the jet.

Requirements for high-pressure cleaner:

• PSI Range: 1,000 - 5,000 (Equivalent to approximately 69 - 345 bar).
• Mas 1.7 GPM (Gallons per minute) (equivalent to approx. 6.44 Liters)

Adapters are sold separately.